Dimensional Arc Built-in Air Pumpplasma Cutting System (LGK-60PLUS)

• Customization: Available
• Cooling Method: Air Cooling
• Frequency Band: High Frequency
• Model NO.: LGK-60 PLUS
• Customized: Customized
• Layout: Horizontal
• Cutting Material: Copper, Carbon Steel, Iron, Aluminum, Metal Alloy, Stainless Steel
• Automatic Grade: Automatic, Manual, Semi-Automatic
• Power Source: Electric
• Cutting Mode: Plasma Cutting
• Power Supply Capacity: 9kVA
• Power Supply Voltage: 220V
• Rated Input Current: 41A
• No-Load Voltage: 280V/70V
• Transport Package: Standard Export Packing
• Specification: Cutting thickness: 20mm
• Trademark: MANYEE
• Origin: China
• HS Code: 8456401000
• Production Capacity: 6000000 Pieces/Year

Product Description

 

• Regulations;
• Non-welding personnel should not enter the workplaces;
• Installation, overhaul, maintenance, and operation must be carried out by professionals;
• Other than welding, the welder should not be used for such purposes as charge, heating, etc.;
• On uneven ground, make sure to keep the welder from tipping over.      

Avoid electric shock or burn

• Keep the earth ground clamp connected to your work piece all the time. Never contact live components of the welding circuit, electrodes/torches or wires with bare hands or skin;
• Connect the welder to the ground with copper wire specified section by a professional electrician.
• Connect the welder to power supply by copper wire specified by a professional electrician, and make sure the insulation sheathing is intact;
• The operator should wear dry welding gloves at work, and always keep the working piece insulated from him, especially at damp or small places;
• Shut off the input power supply when the machine is not in use.

Avoid breathing welding smog

• Smog generated at welding and cutting is harmful to health. To avoid gas poisoning and suffocation, keep the working area well ventilated.

Avoid hazards to eyes and skin by welding arc, spatter and slag

• Wear approved anti-radiation glasses at work as welding arc may cause eye inflammation, and splash and sparks may harm eyes;
• Wear welding gloves, helmet, working clothes, foot protection cover, etc. to protect the skin from such hazards as arc light, splash and sparks.

Prevent accidents, such as fire, explosion, outburst, etc.

• Remove any flammable materials from the work area as welding splash and sparks may cause a fire;
• Welding cable and working pieces must be connected tightly to avoid fire caused by high heat;

MAIN TECHNICAL DATA

Spec.            Model	LGK-40Z	LGK-60Z	LGK-40 PLUS	LGK-60 PLUS
Power supply voltage	220v	220v	220V	220v
Power frequency	50~60 Hz	50~60 Hz	50~60 Hz	50~60 Hz
Power supply capacity	5.2 kVA	9 kVA	5.2kVA	9kVA
Rated input current	23 A	41 A	23A	41A
No-load voltage	240 V	280 V	240V/65V	280 V/70V
Cutting current range	20-40 A	20-60 A	20-40 A	20-60 A
Cutting  voltage	96 V	104 V	96V	104V
Duty cycle	60%	60%		60%
Efficiency	85%	85%		85%
Tip hole diameter	1.0 mm	1.3mm	1.0mm	1.3 mm
Arc striking model	touch	Untouch	touch	Untouch
Cosφ (η)	0.93	0.93	0.93	0.93
Air pressure	0.3-0.4MPa	0.3-0.45MPa		0.35-0.5MPa
Cutting thickness(Max)	10 mm	20	10 mm		20mm
Welding current range	NONE	NONE	50~140A		70~180A
Welding voltage	NONE	NONE	25V		27V
Air flow	100 L/min	110 L/min		110 L/min
Insulation grade	F	F		F
Protection grade	IP 21S	IP 21 S		IP 21 S
Net Weight	19 kg	24 kg		25 kg
Dimensions (mm)

TORCH ASSEMBLY